Difference between revisions of "3D printing prerequisites"
(Created page with " == Prerequisites == The printer is set up only to accept files in .x3g format supplied on an SD card. If you want to print some other way forget it. Since most instructions will...") |
|||
| Line 1: | Line 1: | ||
| − | + | == Prerequisites for using the 3D printer in the Fab Lab == | |
| − | == Prerequisites == | ||
The printer is set up only to accept files in .x3g format supplied on an SD card. If you want to print some other way forget it. | The printer is set up only to accept files in .x3g format supplied on an SD card. If you want to print some other way forget it. | ||
Since most instructions will assume you print from makerware from a computer directly attached to the print please follow these | Since most instructions will assume you print from makerware from a computer directly attached to the print please follow these | ||
Latest revision as of 19:45, 9 June 2013
Contents
Prerequisites for using the 3D printer in the Fab Lab
The printer is set up only to accept files in .x3g format supplied on an SD card. If you want to print some other way forget it. Since most instructions will assume you print from makerware from a computer directly attached to the print please follow these instructions carefully (else you can bugger the printer).
Software
Please install the follow bits of software on your computer - they all run on all platforms (Windows, Mac and Linux) and all have reasonable instructions for installation. I have only tested on linux from kubuntu, YMMV.
OpenSCAD
This is a really nice bit of software for designing 3D objects. You use it be writing a very simple program to describe your object. Once you are happy you export to a .STL file which describes your object. OpenSCAD is in kubuntu repositories
ReplicatorG
This will take the .STL file and produce .gcode and .x3g code. The .gcode is basically the generic instructions for printing the object. The .x3g is a specific translation of the gcode for the 3D printer. ReplicatorG can be obtained here: http://replicat.org/
ReptierHost
This is useful for viewing the .gcode instructions to make sure you are happy with the internal structure of the object you're designing. RepetierHost can be downloaded here: http://www.repetier.com/download/
Makerware
This is makerbot's own system - I haven't tried it.
