Eagle PCBTrain

From Applied Optics Wiki
Revision as of 16:45, 21 October 2013 by Sam Achamfuo-Yeboah (talk | contribs) (a few edits)

Jump to: navigation, search

Eagle PCB -> PCBTrain Export Mini How-To

Old page is at Steve's PCBTrain Export Mini HowTo.

Introduction

This Mini Howto explains how to export PCBs designed using Eagle PCB by Cadsoft into a format suitable for submission to [www.pcbtrain.com PCBTrain], a division of Newbury Electronics. PCB Train is normally where we get our PCBs made externally, here at the [www.nottingham.ac.uk/eee/ School of Electrical and Electronic Engineering] at the [www.nottingham.ac.uk University of Nottingham, UK]. Neither the author, the School nor the University endorses or otherwise any particular PCB manufacturer; this is just personally the one we use, and we know a lot of other people who use Eagle also do too.

The export process is very easy; this page mainly contains simple instructions, some configuration files (design rules and CAM jobs), and some simple shell scripts to make the export process easy. Note that the configuration files are applicable to all the architectures that Eagle supports (and to its credit, it supports Linux, Windows and Mac OSX at the time of writing); the shell scripts will only work in Linux, and possible OS X (though I haven't tried them). They are just for convenience, they are not obligatory.

It's also worth noting that CadSoft run a very active [www.cadsoft.de/forum EAGLE Forum], which is actually a set of news groups in English and German. If you cannot find the answer to your question either here or in the manuals (click "Program", then "manual-eng.pdf" or "tutorial-eng.pdf") then joining and posting on the newsgroup is well worth a try.

The Export Process