Difference between revisions of "Installing SuSE 11.0"

From Applied Optics Wiki
Jump to: navigation, search
(New page: Back to Linux How-tos ==THIS IS A WORK IN PROGRESS AND HASN'T BEEN UPDATED FULLY FOR 11.0!== ==Installing SUSE 11.0 on AO linux computers.== === First and most important step:=== ...)
 
(updated as much as I could, 10.3-11.0)
Line 39: Line 39:
 
=== Fourth step: The install ===
 
=== Fourth step: The install ===
  
Stick the DVD in the drive, reboot the computer, follow the instructions:
+
Stick the DVD in the drive, reboot the computer, select "Installation" (rather than "Boot from hard disk") on the boot menu, then follow the instructions:
  
*English (UK) keyboard
+
*Language: English (UK) (keyboard should automatically change to UK too)
 +
*Agree to license agreement
 
*New installation (not upgrade)
 
*New installation (not upgrade)
 +
*DESELECT "Use Automatic Configuration" - otherwise the installer will assume you want to use DHCP for the network settings, which we don't want to do as the PC probably isn't in the DHCP tables (or if it is, it'll have the wrong IP address)
 
*UK timezone (this should come up automatically. If US timezone came up, then you forgot to select UK keyboard. Abort installation and try again)
 
*UK timezone (this should come up automatically. If US timezone came up, then you forgot to select UK keyboard. Abort installation and try again)
*KDE desktop (unless you specifically want Gnome and are prepared to fix things yourself)
+
*KDE desktop (unless you specifically want Gnome and are prepared to fix things yourself) - either 3.5 or 4.0; I guess 4.0 is stable enough for most people now and will improve gradually over time.
  
 
==== Partitioning:====
 
==== Partitioning:====
Line 50: Line 52:
 
This is probably the most complicated bit, the bit you're most likely to need help with, and the bit that it's important to get correct. If you heeded the warning at the beginning about being prepared to trash your PC (as in wipe all the information stored on the hard drive), then this is the moment that you (probably) will do that.
 
This is probably the most complicated bit, the bit you're most likely to need help with, and the bit that it's important to get correct. If you heeded the warning at the beginning about being prepared to trash your PC (as in wipe all the information stored on the hard drive), then this is the moment that you (probably) will do that.
  
* Click "Partitioning"
+
* Click "Edit Partition Setup..."
* Click "Create custom partition setup"
 
* Click "Custom partitioning (for experts)"
 
  
 
Your computer probably has the following partitions on it:
 
Your computer probably has the following partitions on it:
Line 63: Line 63:
 
Assuming a hard disk size of 80GB or more, the ideal setup for partitions should be:
 
Assuming a hard disk size of 80GB or more, the ideal setup for partitions should be:
  
* SWAP partition, (format: "Linux Swap") twice the size of your RAM
+
* SWAP partition, (format: "Linux Swap") at least twice the size of your RAM
 
* 20GB root (" / ") partition (format: "ext3")
 
* 20GB root (" / ") partition (format: "ext3")
* 20GB spare partition (format: "ext3"), which contains either the root partition from the ''previous'' install (mount point: "/old_root_partition"), or spare for the ''next'' install (SuSE 10.5 or whatever; mount point: "/spare_for_next_install")
+
* 20GB spare partition (format: "ext3"), which contains either the root partition from the ''previous'' install (mount point: "/old_root_partition"), or spare for the ''next'' install (SuSE 11.1 or whatever; mount point: "/spare_for_next_install")
 
* (Windows partition, if any)
 
* (Windows partition, if any)
 
* The rest of the hard drive taken up with a partition (format: "ext3") that should be mounted at /eee
 
* The rest of the hard drive taken up with a partition (format: "ext3") that should be mounted at /eee
Line 71: Line 71:
 
If there is the opportunity to change the disk to the above partition setup - e.g. if there is no "local storage" partition or you don't mind if it's wiped - then you should do so.
 
If there is the opportunity to change the disk to the above partition setup - e.g. if there is no "local storage" partition or you don't mind if it's wiped - then you should do so.
  
You should be able to relate the info here to the information about your disks you found during your preparation.  Assuming all is well all you need to do is follow the custom partition settings to reformat the 20Gb "root" partition and mount it as "/". You can leave the rest untouched and anything on the other disks will be preserved.  You should set the mount points of the other partitions/disks here.   
+
You should be able to relate the info here to the information about your disks you found during your preparation.  Assuming all is well all you need to do is follow the custom partition settings to reformat the 20Gb "spare" partition and mount it as "/". You can leave the rest untouched and anything on the other disks will be preserved.  You should set the mount points of the other partitions/disks here.   
  
 
ASSUMING YOUR COMPUTER DOESN'T MATCH THIS: Stop and ask for advice before proceeding.  There are very good reasons for switching to a root + other partition scheme.
 
ASSUMING YOUR COMPUTER DOESN'T MATCH THIS: Stop and ask for advice before proceeding.  There are very good reasons for switching to a root + other partition scheme.
Line 85: Line 85:
 
After you've decided on a partitioning setup, click "Accept"
 
After you've decided on a partitioning setup, click "Accept"
  
* Agree to the various licenses
+
==== More configuration ====
* Go to lunch or have a long cup of tea whilst the installer installs the packages from the DVD. This can take anything from 15 minutes for a really fast machine, to 40+ minutes on an old machine with little memory.
+
 
 +
On the "Create New User" page...
 +
 
 +
* Deselect "Use this password for system administrator"
 +
* Deselect "Automatic Login"
 +
* Click "Change..."
 +
* Click "NIS" (under "Authentication Method") then "Accept"
 +
* Click "Next"
 +
* Root password: you should know this - use the previous one.
 +
* Click "Install"
 +
 
 +
* Go to lunch or have a long cup of tea whilst the installer installs the packages from the DVD. Although this is quicker than previous installations, it still takes time. 10-30 minutes seems about right.
  
 
Once the package installation is complete, the PC will automatically reboot. From this point on, if the computer reboots, allow it to "Boot from hard disk" after the green multi-language welcome screen.
 
Once the package installation is complete, the PC will automatically reboot. From this point on, if the computer reboots, allow it to "Boot from hard disk" after the green multi-language welcome screen.
Line 93: Line 104:
  
 
There are a number of steps in the SUSE install to follow and then a number of steps to configure your computer for the local environment:
 
There are a number of steps in the SUSE install to follow and then a number of steps to configure your computer for the local environment:
 
Root password: You should know this - use the previous one.
 
  
 
Check install: Just reports errors nothing for you to do.
 
Check install: Just reports errors nothing for you to do.
  
Hostname: This is the name of your computer - use the previous one. The domain is eee.nottingham.ac.uk
+
* Hostname: This is the name of your computer - use the previous one
 +
* The domain is eee.nottingham.ac.uk
 +
* Deselect "Change Hostname via DHCP"
 +
* Click "Next"
  
 
Network settings: You usually only have one network card and if you have two either know what you are doing or ask for help.
 
Network settings: You usually only have one network card and if you have two either know what you are doing or ask for help.
 
* General network settings: leave alone.
 
* General network settings: leave alone.
* Network interfaces: Edit this
+
* Network interfaces: click this to edit it:
# "Overview" (tab), click "Configure" button, "Address" tab:
+
# "Overview" (tab): click "Edit" button, "Address" tab:
 
## Select "Statically assigned IP Address" button
 
## Select "Statically assigned IP Address" button
 
## Enter your IP address (from your notes)
 
## Enter your IP address (from your notes)
Line 114: Line 126:
 
# Routing (tab):
 
# Routing (tab):
 
## Default Gateway: 128.243.1.1
 
## Default Gateway: 128.243.1.1
# Click "Accept"
+
# Click "OK"
  
 
Firewall:
 
Firewall:
 
* "Allowed services" (on left): "Add" the following:
 
* "Allowed services" (on left): "Add" the following:
# SSH
 
 
# Secure shell server
 
# Secure shell server
 
# NIS client
 
# NIS client
# NFS client
+
# NFS client (not sure yet which of the two offered we should select... suspect one is kernel, the other is user. sds/ral to check)
 
# IPP client
 
# IPP client
 
# cups
 
# cups
Line 135: Line 146:
 
Next the install will try to test the network settings - if there isn't a good reason for this to fail it should work!
 
Next the install will try to test the network settings - if there isn't a good reason for this to fail it should work!
 
* Registration: just click next and allow it to attempt this - it sets up an update repository if it can (this takes a few minutes)
 
* Registration: just click next and allow it to attempt this - it sets up an update repository if it can (this takes a few minutes)
* Update: will check for updates (there will be lots), allow it to install them all. At the time of writing, it first installs an update to the updater itself ("yast2-online-update"), which requires clicking "Accept" then "Next" then "Ok" then "Accept", after that it will warn you it's updating the kernel and will have to reboot at some point (allow it to do this by clicking "Accept") but once it's on its way updating the majority of the packages, you can go and make yourself a nice cup of tea/go for lunch, as this part may take anything from 15 minutes to an hour if the network's heavily loaded and/or your machine is slow with little memory. When this is done, click "Next" and allow the computer to reboot.
+
* Update: will check for updates (there will be lots), allow it to install them all. At the time of writing, it first installs an update to the updater itself ("yast2-online-update"), which requires clicking "Accept" then "Next" then "Ok" then "Accept", but once it's on its way updating the majority of the packages, you can go and make yourself a nice cup of tea/go for lunch, as this part may take anything from 10 minutes to an hour if the network's heavily loaded and/or your machine is slow with little memory. When this is done, click "Next" and allow the computer to reboot.
 +
 
 +
sds/ral: presumably you get to do the following at some point (I didn't get to because I was installing suse on parka which does not use NIS)...:
 +
 
 
* User Authentication Method: select NIS
 
* User Authentication Method: select NIS
 
## NIS domain name applied_optics
 
## NIS domain name applied_optics
 
## NIS servers 128.243.74.2 128.243.74.4 separated by a space
 
## NIS servers 128.243.74.2 128.243.74.4 separated by a space
 
## Select start automounter
 
## Select start automounter
* Ignore release notes unless you are interested
+
 
 +
* Have a quick read of the release notes. The most important note is that you need to press Ctrl-Alt-Backspace '''twice within 2 seconds''' to get the X-server (your desktop) to restart
 
* Hardware config: Mainly gets it right but sometimes selects a lower screen resolution than you want or gets the monitor wrong (you usually want 24bit colour). Ignore Printers - these will get set up later.
 
* Hardware config: Mainly gets it right but sometimes selects a lower screen resolution than you want or gets the monitor wrong (you usually want 24bit colour). Ignore Printers - these will get set up later.
 
* Machine restarts some services here and if all is well you can now log in as usual!
 
* Machine restarts some services here and if all is well you can now log in as usual!
Line 147: Line 162:
  
 
* Log in as root
 
* Log in as root
# cd /home/share/suse_hacks/10.3
+
# cd /home/share/suse_hacks/11.0
# Run ''''ONE'''' of the following scripts, most appropriate script for your location, either:
+
# Run '''ONE''' of the following scripts, most appropriate script for your location, either:
## ./std_suse_10.3_hacks_ao
+
## ./std_suse_11.0_hacks_ao
## ./std_suse_10.3_hacks_ibios
+
## ./std_suse_11.0_hacks_ibios
## ./std_suse_10.3_hacks_sios
+
## ./std_suse_11.0_hacks_sios
## ./std_suse_10.3_hacks_vlsi
+
## ./std_suse_11.0_hacks_vlsi
 
#There isn't a huge lot of difference except for local stuff like default printers.  The script adds the main online repositories (OSS and non-OSS), disables the DVD respository, deletes some SUSE irritations (eg beagle), sets up some useful stuff (eg locate) and installs dead useful software such as compilers, latex and xfig. In addition, it also sets up some network stuff, like telling the PC to use the hostname list (/etc/hosts) on armchair. Without this, it won't know the IP addresses of AOG PCs like bed, which means (if you're in SiOS) you won't be able to log in. That's why we do this first (as root), before attempting to log in as yourself.
 
#There isn't a huge lot of difference except for local stuff like default printers.  The script adds the main online repositories (OSS and non-OSS), disables the DVD respository, deletes some SUSE irritations (eg beagle), sets up some useful stuff (eg locate) and installs dead useful software such as compilers, latex and xfig. In addition, it also sets up some network stuff, like telling the PC to use the hostname list (/etc/hosts) on armchair. Without this, it won't know the IP addresses of AOG PCs like bed, which means (if you're in SiOS) you won't be able to log in. That's why we do this first (as root), before attempting to log in as yourself.
 
#Log out, and reboot the PC.
 
#Log out, and reboot the PC.

Revision as of 13:33, 22 July 2008

Back to Linux How-tos

THIS IS A WORK IN PROGRESS AND HASN'T BEEN UPDATED FULLY FOR 11.0!

Installing SUSE 11.0 on AO linux computers.

First and most important step:

Be prepare to trash your computer and lose everything stored on it.

So make sure you know what software you installed on it before you decided to update the system, also make sure you know what every other user installed on it. Look in /etc and /local for evidence of non standard software (eg matlab, comsol, cadence, coventor etc and locally produced software such as c_scan, BNS, etc and check in /etc for evidence of configuration files eg /etc/stages /etc/andor etc).

Back up anything you might need - files, programs, data, configurations etc.

However, if you are on the AO linux network your personal files and data are most likely stored of the server (anything in /home is on the server).

  • If in doubt ASK someone in the know *

Second step: Your computer

  • What kind of processor? (arch)
  • What disks / partitions does it have? (df, mount, cat /etc/fstab)
  • what is the hostname? (hostname)
  • What are your network settings? (/sbin/ifconfig - you are looking for the numbers after "inet addr:" in the "eth0" section)
  • What is the root password? (you should know)
  • What cards / screens / gadgets does it have?

Third step:

Get hold of the SUSE 11.0 install DVD for your computer. If the arch is i386/i586/i686 (32 bit machines) you will need the i386 disk. If the arch is x86_64 (64 bit machines) you need the x86_64 disk. If you are unlucky enough to be using a PPC machine you need the PPC disk and a lot of patience.

Fourth step: The install

Stick the DVD in the drive, reboot the computer, select "Installation" (rather than "Boot from hard disk") on the boot menu, then follow the instructions:

  • Language: English (UK) (keyboard should automatically change to UK too)
  • Agree to license agreement
  • New installation (not upgrade)
  • DESELECT "Use Automatic Configuration" - otherwise the installer will assume you want to use DHCP for the network settings, which we don't want to do as the PC probably isn't in the DHCP tables (or if it is, it'll have the wrong IP address)
  • UK timezone (this should come up automatically. If US timezone came up, then you forgot to select UK keyboard. Abort installation and try again)
  • KDE desktop (unless you specifically want Gnome and are prepared to fix things yourself) - either 3.5 or 4.0; I guess 4.0 is stable enough for most people now and will improve gradually over time.

Partitioning:

This is probably the most complicated bit, the bit you're most likely to need help with, and the bit that it's important to get correct. If you heeded the warning at the beginning about being prepared to trash your PC (as in wipe all the information stored on the hard drive), then this is the moment that you (probably) will do that.

  • Click "Edit Partition Setup..."

Your computer probably has the following partitions on it:

  • A swap partition (roughly twice the size of your RAM)
  • 20-30Gb "root" partition
  • A remainder partition (should be mounted on /eee, may have been mounted on /local_storage or /SCRATCH)
  • You may also have a large data partition and a windows partition.

Assuming a hard disk size of 80GB or more, the ideal setup for partitions should be:

  • SWAP partition, (format: "Linux Swap") at least twice the size of your RAM
  • 20GB root (" / ") partition (format: "ext3")
  • 20GB spare partition (format: "ext3"), which contains either the root partition from the previous install (mount point: "/old_root_partition"), or spare for the next install (SuSE 11.1 or whatever; mount point: "/spare_for_next_install")
  • (Windows partition, if any)
  • The rest of the hard drive taken up with a partition (format: "ext3") that should be mounted at /eee

If there is the opportunity to change the disk to the above partition setup - e.g. if there is no "local storage" partition or you don't mind if it's wiped - then you should do so.

You should be able to relate the info here to the information about your disks you found during your preparation. Assuming all is well all you need to do is follow the custom partition settings to reformat the 20Gb "spare" partition and mount it as "/". You can leave the rest untouched and anything on the other disks will be preserved. You should set the mount points of the other partitions/disks here.

ASSUMING YOUR COMPUTER DOESN'T MATCH THIS: Stop and ask for advice before proceeding. There are very good reasons for switching to a root + other partition scheme.

If you create a new partition, you will be asked if you want to create a primary or extended partition. The rules are simple:

  • If this is anything other than your fourth partition, select primary
  • If this is your fourth partition (sda4 or hda4), select extended then just click "Ok" on the next screen. Then click "create" to create the partition you actually want.

Assuming you have a sensible partition scheme you can proceed and your "/" partition and data on it will be wiped and the new system installed on top of them. This could take the best part of an hour so go and get a cup of tea or fix this page on the wiki...

Have a look at AO linux partitioning for more information.

After you've decided on a partitioning setup, click "Accept"

More configuration

On the "Create New User" page...

  • Deselect "Use this password for system administrator"
  • Deselect "Automatic Login"
  • Click "Change..."
  • Click "NIS" (under "Authentication Method") then "Accept"
  • Click "Next"
  • Root password: you should know this - use the previous one.
  • Click "Install"
  • Go to lunch or have a long cup of tea whilst the installer installs the packages from the DVD. Although this is quicker than previous installations, it still takes time. 10-30 minutes seems about right.

Once the package installation is complete, the PC will automatically reboot. From this point on, if the computer reboots, allow it to "Boot from hard disk" after the green multi-language welcome screen.

Step five: Configuring your computer for the AO network

There are a number of steps in the SUSE install to follow and then a number of steps to configure your computer for the local environment:

Check install: Just reports errors nothing for you to do.

  • Hostname: This is the name of your computer - use the previous one
  • The domain is eee.nottingham.ac.uk
  • Deselect "Change Hostname via DHCP"
  • Click "Next"

Network settings: You usually only have one network card and if you have two either know what you are doing or ask for help.

  • General network settings: leave alone.
  • Network interfaces: click this to edit it:
  1. "Overview" (tab): click "Edit" button, "Address" tab:
    1. Select "Statically assigned IP Address" button
    2. Enter your IP address (from your notes)
    3. Subnet mask 255.255.0.0
    4. Hostname: (from notes)
    5. Click "Next"
  2. Hostnames/DNS (tab):
    1. Hostname and Domain Name should already be filled in as before
    2. Names servers are 128.243.40.192, 128.243.40.194, 128.243.21.19
  3. Routing (tab):
    1. Default Gateway: 128.243.1.1
  4. Click "OK"

Firewall:

  • "Allowed services" (on left): "Add" the following:
  1. Secure shell server
  2. NIS client
  3. NFS client (not sure yet which of the two offered we should select... suspect one is kernel, the other is user. sds/ral to check)
  4. IPP client
  5. cups
  • "Logging Level" (on left): select "Do not log any" for:
  1. Accepted Packets
  2. Not Accepted Packets

Proxy:

  1. Click "Enable Proxy"
  2. Set the first box (HTTP Proxy URL) to http://optics.eee.nottingham.ac.uk:62267
  3. "No proxy domains" (comma-separated list): localhost, 127.0.0.1, .nottingham.ac.uk, .nott.ac.uk

Next the install will try to test the network settings - if there isn't a good reason for this to fail it should work!

  • Registration: just click next and allow it to attempt this - it sets up an update repository if it can (this takes a few minutes)
  • Update: will check for updates (there will be lots), allow it to install them all. At the time of writing, it first installs an update to the updater itself ("yast2-online-update"), which requires clicking "Accept" then "Next" then "Ok" then "Accept", but once it's on its way updating the majority of the packages, you can go and make yourself a nice cup of tea/go for lunch, as this part may take anything from 10 minutes to an hour if the network's heavily loaded and/or your machine is slow with little memory. When this is done, click "Next" and allow the computer to reboot.

sds/ral: presumably you get to do the following at some point (I didn't get to because I was installing suse on parka which does not use NIS)...:

  • User Authentication Method: select NIS
    1. NIS domain name applied_optics
    2. NIS servers 128.243.74.2 128.243.74.4 separated by a space
    3. Select start automounter
  • Have a quick read of the release notes. The most important note is that you need to press Ctrl-Alt-Backspace twice within 2 seconds to get the X-server (your desktop) to restart
  • Hardware config: Mainly gets it right but sometimes selects a lower screen resolution than you want or gets the monitor wrong (you usually want 24bit colour). Ignore Printers - these will get set up later.
  • Machine restarts some services here and if all is well you can now log in as usual!

Post installation configuration and setting up package management

  • Log in as root
  1. cd /home/share/suse_hacks/11.0
  2. Run ONE of the following scripts, most appropriate script for your location, either:
    1. ./std_suse_11.0_hacks_ao
    2. ./std_suse_11.0_hacks_ibios
    3. ./std_suse_11.0_hacks_sios
    4. ./std_suse_11.0_hacks_vlsi
  3. There isn't a huge lot of difference except for local stuff like default printers. The script adds the main online repositories (OSS and non-OSS), disables the DVD respository, deletes some SUSE irritations (eg beagle), sets up some useful stuff (eg locate) and installs dead useful software such as compilers, latex and xfig. In addition, it also sets up some network stuff, like telling the PC to use the hostname list (/etc/hosts) on armchair. Without this, it won't know the IP addresses of AOG PCs like bed, which means (if you're in SiOS) you won't be able to log in. That's why we do this first (as root), before attempting to log in as yourself.
  4. Log out, and reboot the PC.
  • Log in as yourself - if this doesn't work, then seek advice.
  • There are still some configuration things to do, this involves using the YaST configuration suite, you'll find it somewhere in the SuSE menu (or, as root, type "yast2" from a console window). If you run it from the SuSE menu, you will need to provide the root password.
  • Click on "Automatic Online Update" - skip this step unless you are sure!
  1. Deselect "Enable automatic update"
  2. Deselect Update daily (some time in the evening if you leave your PC on overnight). Make sure "Skip interactive patches" is checked (it should be by default) - this prevents SuSE installing things like kernel updates without your knowledge.
  3. Click "Finish"
  • On the "Network Services" submenu, click on "NTP Configuration"
  1. Click on "During Boot"
  2. As the NTP Server Configuration address, use: ntp0.nottingham.ac.uk (it's a zero, not a capital "oh")
  3. Click on "Test", it should respond something like "Server is reachable and responds properly"
  4. Click "Finish"

Install the smart package manager

SMART is a rival package manager and once you have used it a few times you will find the yast method unreasonably slow and rude.

  1. zypper sa -r http://download.opensuse.org/repositories/smart/openSUSE_10.3/smart.repo
  2. zypper ref smart
  3. zypper install smart smart-gui
  4. smart channel --add http://linux01.gwdg.de/~pbleser/files/smart/opensuse-10.3.txt
  5. smart mirror --add http://linux01.gwdg.de/~pbleser/files/smart/mirrors-eu.txt
  6. smart update

Graphics card

There is a good chance you have an nVIDIA graphics card in your computer. If so you will probably want to install the nVIDIA graphics driver. This is not included in the default installation because of licensing issues but YAST can manage it for most cards.

  • Start YaST (see above)
  • In the "Software" submenu, click on "Community Repositories"
  1. Add "NVIDIA Repository"
  2. Click "Finish" and if it asks you questions about keys, then trust and import them.
  • In the "Software" submenu, click on "Software Management"
  1. Search for nvidia
  2. Select "nvidia-gfxG01-kmp-default"
  3. Click "Accept" It will tell you it's installing some other nvidia-related stuff to satisfy dependencies.
  4. When it's done, quit the Software Management utility.
  • Quit YaST

When you log out, X should restart and you should now be running the nVIDIA graphics driver with 3D acceleration. Try an openGL screen saver or start glxgears.

If this fails (and it is known to fail for very old and very new cards) you will have to use the manual method - ask for advice. Manually installed nVIDIA drivers are not automatically updated by YAST and can be screwed up by certain updates and will require reinstalling - you may wish to turn certain updates off (ask).

SaX2 (the YaST graphics config tool) doesn't really understand nVIDIA cards if it doesn't do what you want then try this tool instead: http://www.sorgonet.com/linux/nv-online/ which worked for me (Matt)

Local Software

  • Steve / Roger - a wiki page for setting up matlab, comsol, cadence etc would be dead handy and here is an attempt linked here
  • c_scan: there is another wiki page which mentions installing c_scan: link is here. Once you have installed c_scan, if you type "man c_scan" you will get the root of the c_scan documentation. Look at the "See also" section at the bottom for hints on specific modules... this this normally the name of the module/action, preceded by "c_" (e.g. "man c_agilent_trace_scope")

Multimedia

You will probably want the multimedia codecs for SUSE. The easiest way to get these is to follow this link http://opensuse-community.org/Multimedia and click on "codecs-kde.ymp". This should get you a full set of multimedia codecs that don't come with SUSE by default because of licensing issues.

64 bit vs 32 bit computers

Annoyingly some software doesn't come in 64 bit flavours and this can cause you significant headaches. In particular a large number of browser plugins only come in 32 bit version (flash, java etc). There is supposed to be a way around this but thus far no one has been able to demonstrate it working properly for me.

My advice: downgrade Firefox to the 32 bit version (in my case I had to remove the 64 bit version and then install the 32 bit version). You can do the same for Java and Java plugin (the rest of the plugins seem to install automatically). To do this use YaST, selct the software you wish to change and selcted i386, i586 or i686 versions in the "Versions" tab.

If someone finds a way to do it 64 bit then feel free to add to this wiki... Matt

Printers

These should get set up when you run the appropriate "suse_hack" script. There is a general page of advice regarding the AOG printers here.

Finally

You should have a working system now and hopefully you won't suddenly remember that something important was installed on one of the disks you wiped. Please fix errors in this wiki.

Cheers,


Matt