Nanoparticle acoustic transducers

Introduction

There has been much interest in the optical and mechanical properties of solid and core-shell nanoparticles. Our interest stems from the ability of such devices to interact with ultrasound of very short wavelength allowing the possibility of high resolution acoustic imaging.

There are a number of different fabrication approaches that could be adopted for making nano ultrasonic transducers. Previously, a plate transducer for cell imaging has been developed, but making the lateral dimensions of the transducer smaller than one micron is challenging. An alternative approach to overcome this difficulty and to increase the frequency is to make transducers using nanoparticles.

Nanoparticle acoustic transducers have some attractions:

• Small size
• Can be made in large quantities
• Easy symmetry
• Can exploit plasmonics to enhance the detection sensitivity (for metal particles)

Optical modelling

The optical sensitivity of the transducer is governed by Mie scattering. The layer structure is designed so that the metal layer is partial reflector. Part of the probe beam incident on the transducer is transmitted into the cavity and is resonantly reflected (and transmitted) by the structure. The transducer (when it vibrates) has to show a high optical sensitivity for the probe wavelength (780 nm) in transmission or/and reflection.

The scattering and backscattering efficiencies are obtained:

where each layer is characterised by the size parameter x_L=2πNr_l/λ and the relative refractive index m_l=n_l/n_m, where λ is the wavelength of the incident wave in vacuum, r_l