Difference between revisions of "3d printing"

From Applied Optics Wiki
Jump to: navigation, search
(Typical workflow (how to design and print something))
 
(3 intermediate revisions by one other user not shown)
Line 1: Line 1:
 
The Fab Lab has a Makerbot Replicator 2 for 3D printing using PLA plastic.
 
The Fab Lab has a Makerbot Replicator 2 for 3D printing using PLA plastic.
 +
 +
'''Watch out - experimental advice - not road tested!'''
  
 
==Training==
 
==Training==
 
The replicator 2 is a relatively easy and straightforward machine to use. BUT please ask someone who has used it before
 
The replicator 2 is a relatively easy and straightforward machine to use. BUT please ask someone who has used it before
 
to show you how before trying it.
 
to show you how before trying it.
[[3D_printing prerequisites]]
 
 
  
 +
[[3D_printing prerequisites|Import stuff before you start including what software to use]]
 
== Typical workflow (how to design and print something) ==
 
== Typical workflow (how to design and print something) ==
# In OpenSCAD design an object - this is done by writing a little program to describe it.  This is very easy and very efficient, eg.
+
<ol>
 +
<li> In OpenSCAD design an object - this is done by writing a little program to describe it.  This is very easy and very efficient, eg.
 
<pre>  
 
<pre>  
 
// linos compatible plate with 30mm hole
 
// linos compatible plate with 30mm hole
 
$fn=50;  
 
$fn=50;  
difference(){  
+
difference()
 +
{  
 
// the cube  
 
// the cube  
minkowski(){  
+
minkowski() // does convolution of the shapes in the routine
cube([38,38,8],center=true);  
+
{  
cylinder(r=1,h=1);  
+
cube([38,38,8],center=true);  
}  
+
cylinder(r=1,h=1);  
 +
}  
 
// the stuff we remove  
 
// the stuff we remove  
 
rotate([0,0,0])cylinder(h=50,r=15,center=true);  
 
rotate([0,0,0])cylinder(h=50,r=15,center=true);  
translate([15,15,0])cylinder(h=10,r=3,center=true);  
+
translate([15,15,0])cylinder(h=10,r=3,center=true); // translation/movements stack
 
translate([-15,15,0])cylinder(h=10,r=3,center=true);  
 
translate([-15,15,0])cylinder(h=10,r=3,center=true);  
 
translate([15,-15,0])cylinder(h=10,r=3,center=true);  
 
translate([15,-15,0])cylinder(h=10,r=3,center=true);  
Line 26: Line 30:
 
}
 
}
 
</pre>
 
</pre>
 +
 +
In-depth review of commands can be found on [http://en.wikibooks.org/wiki/OpenSCAD_User_Manual wikibooks].
  
 
When you're happy use OpenSCAD to save in the .STL format
 
When you're happy use OpenSCAD to save in the .STL format
 +
</li>
 +
<li> Turn the .STL into .x3g
 +
<ol>
 +
<li> Load the .STL file in replicatorg<br> '''NB: Make sure replicatorg is set for the correct printer''' (machine:machine type (driver):replicator 2). </li>
 +
<li> Use the GCode:estimate function to estimate how long your design will take to print - do you really want to do this?</li>
 +
<li> Select generate .gcode (or click the ->gcode button), this will typically take a few minutes. This '''should''' spot if your design has -ve height - '''allow replicatorg to fix this'''. Get a cup of tea.</li>
 +
<li>Generate the .x3g file - press the ->document icon (Build file for SD card, located next to ->gcode button). '''Make sure you select .x3g".</li>
 +
</li>
  
# Turn the .STL into .x3g
+
<li> Check the .gcode with RepitierHost<br>Simply load the .gcode file and check it layer by layer to make sure you are happy.</li>
 
+
</ol>
## Load the .STL file in replicatorg
+
<li> Put your .x3g file onto an SD card. Take to the printer, insert and print.</li>
'''NB: Make sure replicatorg is set for the correct printer''' (machine:machine type (driver):replicator 2).
+
</ol>
## Use the GCode:estimate function to estimate how long your design will take to print - do you really want to do this?
 
## Select generate .gcode (or click the ->gcode button), this will typically take a few minutes. This '''should''' spot if your
 
design has -ve height - '''allow replicatorg to fix this'''. Get a cup of tea.
 
## Generate the .x3g file - press the ->document icon (Build file for SD card, located next to ->gcode button). '''Make sure you select .x3g".
 
 
 
# Check the .gcode with RepitierHost
 
 
 
Simply load the .gcode file and check it layer by layer to make sure you are happy.
 
 
 
# Put your .x3g file onto an SD card. Take to the printer, insert and print.
 

Latest revision as of 11:48, 12 June 2013

The Fab Lab has a Makerbot Replicator 2 for 3D printing using PLA plastic.

Watch out - experimental advice - not road tested!

Training

The replicator 2 is a relatively easy and straightforward machine to use. BUT please ask someone who has used it before to show you how before trying it.

Import stuff before you start including what software to use

Typical workflow (how to design and print something)

  1. In OpenSCAD design an object - this is done by writing a little program to describe it. This is very easy and very efficient, eg.
     
    // linos compatible plate with 30mm hole
    $fn=50; 
    difference()
    	{ 
    	// the cube 
    	minkowski() // does convolution of the shapes in the routine
    		{ 
    		cube([38,38,8],center=true); 
    		cylinder(r=1,h=1); 
    		} 
    	// the stuff we remove 
    	rotate([0,0,0])cylinder(h=50,r=15,center=true); 
    	translate([15,15,0])cylinder(h=10,r=3,center=true); // translation/movements stack
    	translate([-15,15,0])cylinder(h=10,r=3,center=true); 
    	translate([15,-15,0])cylinder(h=10,r=3,center=true); 
    	translate([-15,-15,0])cylinder(h=10,r=3,center=true); 
    	}
    

    In-depth review of commands can be found on wikibooks.

    When you're happy use OpenSCAD to save in the .STL format

  2. Turn the .STL into .x3g
    1. Load the .STL file in replicatorg
      NB: Make sure replicatorg is set for the correct printer (machine:machine type (driver):replicator 2).
    2. Use the GCode:estimate function to estimate how long your design will take to print - do you really want to do this?
    3. Select generate .gcode (or click the ->gcode button), this will typically take a few minutes. This should spot if your design has -ve height - allow replicatorg to fix this. Get a cup of tea.
    4. Generate the .x3g file - press the ->document icon (Build file for SD card, located next to ->gcode button). Make sure you select .x3g".
    5. Check the .gcode with RepitierHost
      Simply load the .gcode file and check it layer by layer to make sure you are happy.
  3. Put your .x3g file onto an SD card. Take to the printer, insert and print.