Difference between revisions of "Nanoscale Ultrasonic Transducers"

From Applied Optics Wiki
Jump to: navigation, search
(Nanoparticle Transducers)
(Plate Transducers)
 
(6 intermediate revisions by the same user not shown)
Line 32: Line 32:
  
 
These transducers are 240nm high with 5-25 micron patch sizes. The lateral dimensions as limited by our in house photo lithography equipment. Other techniques could be employed to reduce the lateral dimensions further.
 
These transducers are 240nm high with 5-25 micron patch sizes. The lateral dimensions as limited by our in house photo lithography equipment. Other techniques could be employed to reduce the lateral dimensions further.
We test the devices with a picosecond laser ultrasound system, which utilises locked femtosecond lasers with control electronics to provide the pulse delay.
+
We test the devices with a picosecond laser ultrasound system, which utilises locked femtosecond lasers with control electronics to provide the pulse delay ([[ASOPs Laser]]).
 
The blue pump pulse is absorbed by the transducer and set it in motion. The probe pulse then measures the interaction of device with the generated acoustic waves.  
 
The blue pump pulse is absorbed by the transducer and set it in motion. The probe pulse then measures the interaction of device with the generated acoustic waves.  
  
Line 56: Line 56:
 
The transducers are made with a similar structure to the plate devices. There is a soft transparent core made from silica nanoparticle. This core is then coated with small gold nanoparticles to form a shell.
 
The transducers are made with a similar structure to the plate devices. There is a soft transparent core made from silica nanoparticle. This core is then coated with small gold nanoparticles to form a shell.
  
The optical response of the transducers has been investigated via Mie theory. The particles have repeating regions of high sensitivity with changes in the layer thicknesses. 3D FEM mechanical modelling shows main breathing mode oscillation and higher order harmonics
+
The optical response of the transducers has been investigated via Mie theory. The transducers have repeating regions of high sensitivity with changes in the layer thicknesses we need to make sure the particles we make are within one of these high sensitivity zones.  
  
We make gold nanoparticles of the chosen shell size (10nm)
+
We have 3D FEM mechanical models that show the mechanical motions of these devices once exciting with a laser pulse. We see from the model that these transducers have one dominant mode,a breathing mode,and there are other higher order harmonics although they are much smaller than in the plate case.
Cores are made to size and functionalised with amine groups
 
Mixing the particles together creates the final transducers  
 
The gold particles bind to the functional groups with electrostatic attraction forming a gold shell
 
 
   
 
   
 
<br style="clear:both" />
 
<br style="clear:both" />
 +
[[file:BNC_paper-nps.PNG |right|thumb|300px|]]
 +
To fabricate the transducer we firstly make gold nanoparticles of the chosen shell size (10nm). The silica cores are made to size and functionalised with amine groups. Mixing the particles together creates the final transducers as the gold particles bind to the functional groups with electrostatic attraction forming a gold shell.
  
 +
Depending on the recipe and process followed it is possible to control the size of the produced particles. We have made transducers with 180nm cores and 10nm shells and have imaged the transducers to look at the coverages of the shells.
  
[[file:BNC_paper-nps.PNG |right|thumb|300px|]]
+
The main advantage of this approach is the quantity of transducers made in each batch typically trillions, making this a viable approach for mass producing devices. We need to improve the fabrication process to control the particle size variance to keep the transducers in the optimal operating region
  
We have made transducers with 180nm cores and 10nm shells
+
Testing of these devices is on going.
Each batch produces trillions of transducers
 
We need to improve the fabrication process to control the size variance to keep particles in optimal operating region
 
Testing of these devices is ongoing
 
  
 
<br style="clear:both" />
 
<br style="clear:both" />
 
==The Future==
 
 
This success of this project requires the input from many different disciplines; engineering, electronics, optics, physics, pharmacy and chemistry. The devices we have made will have many potential applications e.g. chemical sensors, embedded in paints to detect the presence of specific compounds (e.g. explosives) or in the petrochemical industry for pollution and process monitoring. Biological, the transducers will be used for performing elasticity measurements inside cells to aid understanding of cell function (formation of cancers, stem cell differentiation).
 
  
 
==Related Publications==
 
==Related Publications==

Latest revision as of 14:08, 20 April 2011

Nanoscale Ultrasonic Transducers

alt text
two approaches to making nanoscale transducers


Ultrasound is a powerful tool for diagnosing medical and mechanical problems. Conventional ultrasonics work at megahertz frequencies and with wavelengths of 1-2mms to 10’s mm. This means it cannot "see" very small objects at the nanoscale. Our new transducers are so small it is impractical to communicate with them electrically. Instead we have devised a non contact method of talking to them using short pulses of laser light.


We have adopted two approaches for producing these transducers, one method builds plates devices the other uses self assembled nanoparticles. The transducers are made from alternating metal and soft transparent layers. They have optical and mechanical resonances and so the devices have to be made such that they work well both mechanically and optically


Plate Transducers

alt text
model of mechanical motion
alt text
optical model

The transducer is made up of alternating layers of gold and ITO to produce a sandwich structure of the reflective metal layers and the soft transparent core.

We have modeled the optical behaviour of these devices as the gold and ITO layer thicknesses are altered . The model shows that the devices have a wide operating region where there is good sensitivity.With the optimal device being made from 40 nm gold layers sandwiching a 160nm ITO layer.

We have also constructed an FE Mechanical model of the devices to show how the devices behaviour when they are excited by an optical pulse. the model shows the difference in displacement between the the two gold layers, this motion has a main frequency component of ~9GHz with harmonics up to ~70GHz


alt text
Experiment system
alt text
240nm x 5 micron transducers on substrate

These devices can be made using standard photolithography techniques where an array of transducers is made on a glass substrate by exposing photo resist to UV through an optical mask. once developed the gold and ITO layers are sputter coated and lift off reveals the structures on the substrate. This approach is very useful as we have an ordered array of devices which we can test in situ. Once tested we can release the transducers from substrate into solution and then reattached them for measurements.

These transducers are 240nm high with 5-25 micron patch sizes. The lateral dimensions as limited by our in house photo lithography equipment. Other techniques could be employed to reduce the lateral dimensions further. We test the devices with a picosecond laser ultrasound system, which utilises locked femtosecond lasers with control electronics to provide the pulse delay (ASOPs Laser). The blue pump pulse is absorbed by the transducer and set it in motion. The probe pulse then measures the interaction of device with the generated acoustic waves.


alt text
Experimental result
alt text
Transducer Attached to hair

We have measured the response on a 240nm x10 micron patch and they agree very well with modelled response. The main frequency is around 9 GHz and there are harmonics up to ~70GHz. The weighting of harmonics do differ from those in the model, this could be due to slight variations in actual material properties and final created layer sizes being different from those modelled.

We hope to employ different dicing techniques in the future to reduce the lateral size of the transducers to below 1 micron.


Nanoparticle Transducers

alt text
model of mechanical motion
alt text
optical model

The transducers are made with a similar structure to the plate devices. There is a soft transparent core made from silica nanoparticle. This core is then coated with small gold nanoparticles to form a shell.

The optical response of the transducers has been investigated via Mie theory. The transducers have repeating regions of high sensitivity with changes in the layer thicknesses we need to make sure the particles we make are within one of these high sensitivity zones.

We have 3D FEM mechanical models that show the mechanical motions of these devices once exciting with a laser pulse. We see from the model that these transducers have one dominant mode,a breathing mode,and there are other higher order harmonics although they are much smaller than in the plate case.


BNC paper-nps.PNG

To fabricate the transducer we firstly make gold nanoparticles of the chosen shell size (10nm). The silica cores are made to size and functionalised with amine groups. Mixing the particles together creates the final transducers as the gold particles bind to the functional groups with electrostatic attraction forming a gold shell.

Depending on the recipe and process followed it is possible to control the size of the produced particles. We have made transducers with 180nm cores and 10nm shells and have imaged the transducers to look at the coverages of the shells.

The main advantage of this approach is the quantity of transducers made in each batch typically trillions, making this a viable approach for mass producing devices. We need to improve the fabrication process to control the particle size variance to keep the transducers in the optimal operating region

Testing of these devices is on going.


Related Publications

R Smith, A Arca, X Chen, L Marques, M Clark, J Aylott, M Somekh - Design and fabrication of ultrasonic transducers with nanoscale dimensions
Journal of Physics: Conference Series 278:012035,2011
http://iopscience.iop.org/1742-6596/278/1/012035
Bibtex<div>Author : R Smith, A Arca, X Chen, L Marques, M Clark, J Aylott, M Somekh
Title : Design and fabrication of ultrasonic transducers with nanoscale dimensions
In : Journal of Physics: Conference Series -
Address :
Date : 2011
</div>

Richard Smith - Set for Britain 2011 London
Technical Report - Poster, The University of Nottingham ,2011
Bibtex
Author : Richard Smith
Title : Set for Britain 2011 London
In : Technical Report - Poster, The University of Nottingham -
Address :
Date : 2011

Richard Smith - AFPAC 2011 Frejus
Technical Report - Talk, The University of Nottingham ,2011
Bibtex
Author : Richard Smith
Title : AFPAC 2011 Frejus
In : Technical Report - Talk, The University of Nottingham -
Address :
Date : 2011

<bibtex> @techreport{noref, title = {LU2010 2010 Bordeaux}, author = {Richard Smith}, year = {2010}, institution = {The University of Nottingham}, type = {Talk}, pdf = {http://optics.eee.nottingham.ac.uk/w/images/c/c4/Talk_2010_LU2010_Bordaeux_RJS_nano_transducers.pdf} }