Nanoscale Ultrasonic Transducers

From Applied Optics Wiki
Revision as of 08:23, 20 April 2011 by Richard Smith (talk | contribs) (Plate devices)

Jump to: navigation, search
alt text
two approaches to making nanoscale transducers

We have created new ultrasonic transducers operating at the nanoscale with frequencies in the gigahertz range and with wavelengths smaller than those of visible light. These will enable the diagnostic power of ultrasonics to be used at the nanoscale.

These new transducers are so small it is impractical to communicate with them electrically. Instead we have devised a non contact method of talking to them using short pulses of laser light. They work by absorbing one laser beam, the pump, which causes them to resonate delivering high frequency ultrasound waves into the sample. We detect the interaction of this sound with the transducer with another laser beam, the probe, which is reflected back to the detector from the different layers that make up the device.


Plate devices

alt text
model of mechanical motion
alt text
optical model

We have successfully modelled and built plate like transducers and tested them in our picosecond laser ultrasound experiment. The experimentally recorded signal agrees remarkably well with the modelled response. The modelling and manufacturing process for the nanoparticle transducers has been established and devices are being created so that they can be measured in the experiment. In the future we hope to encapsulate and functionalise the devices so that they can be used in targeted measurements within cells.


alt text
Experimental result
alt text
Transducer Attached to hair


self assembled nanoparticles