Difference between revisions of "Installing Kubuntu 18.04"
From Applied Optics Wiki
Rikesh Patel (talk | contribs) |
Rikesh Patel (talk | contribs) |
||
Line 16: | Line 16: | ||
iface enp*s* inet static | iface enp*s* inet static | ||
address 192.168.74.1 | address 192.168.74.1 | ||
− | netmask 255.255.255.0 | + | netmask 255.255.255.0</pre> |
* Restart networking using <code>sudo systemctl restart networking</code> | * Restart networking using <code>sudo systemctl restart networking</code> |
Revision as of 10:36, 16 January 2019
Few changes to 18.04
- Network order has been somewhat fixed, you can use the network manager to set IP address/gateway/etc
- SDDM is now an issue (formally KDM) - it loads before ubuntu has a chance to get NIS users. Additionally, it logs out users after a couple of minutes of use - can't figure why (possible graphics issue? not being able to immediately do something with users passwd/profile?). It is definitely not a power saving problem.
- Fix for this is to use lightdm
sudo apt-get install lightdm-gtk-greeter lightdm
- IS had changed some gateway settings, here's the new set of addresses to use for interfaces;
auto enp*s* iface enp*s* inet static address 128.243.74.*** netmask 255.255.255.0 gateway 128.243.74.254 dns-nameservers 128.243.40.11 128.243.40.12 128.243.21.19
- To get a local (lab) network working (with devices that can set their own IP and point to
192.168.74.1
as the gateway), add this to interfaces;
auto enp*s* iface enp*s* inet static address 192.168.74.1 netmask 255.255.255.0
- Restart networking using
sudo systemctl restart networking