Difference between revisions of "Installing Kubuntu 18.04"

From Applied Optics Wiki
Jump to: navigation, search
Line 16: Line 16:
 
iface enp*s* inet static
 
iface enp*s* inet static
 
address 192.168.74.1
 
address 192.168.74.1
netmask 255.255.255.0
+
netmask 255.255.255.0</pre>
 
* Restart networking using <code>sudo systemctl restart networking</code>
 
* Restart networking using <code>sudo systemctl restart networking</code>

Revision as of 10:36, 16 January 2019

Few changes to 18.04

  • Network order has been somewhat fixed, you can use the network manager to set IP address/gateway/etc
  • SDDM is now an issue (formally KDM) - it loads before ubuntu has a chance to get NIS users. Additionally, it logs out users after a couple of minutes of use - can't figure why (possible graphics issue? not being able to immediately do something with users passwd/profile?). It is definitely not a power saving problem.
    • Fix for this is to use lightdm

sudo apt-get install lightdm-gtk-greeter lightdm

  • IS had changed some gateway settings, here's the new set of addresses to use for interfaces;
auto enp*s*
iface enp*s* inet static
address 128.243.74.***
netmask 255.255.255.0
gateway 128.243.74.254
dns-nameservers 128.243.40.11 128.243.40.12 128.243.21.19
  • To get a local (lab) network working (with devices that can set their own IP and point to 192.168.74.1 as the gateway), add this to interfaces;
auto enp*s*
iface enp*s* inet static
address 192.168.74.1
netmask 255.255.255.0
  • Restart networking using sudo systemctl restart networking