CMOS C35 Responsivity
From Applied Optics Wiki
Revision as of 14:18, 18 November 2013 by Sam Achamfuo-Yeboah (talk | contribs)
A quick test to determine the spectral responsivity of the 0.35um process we use quite a lot in this department.
Experiment was conducted on SKED1. 30kOhm load, using 8 hi-power LEDs.
- Sked1 R.jpg
Responsivity and Quantum Efficiency
There is no data from the C35 datasheet, but the opto process gives responsivity data, and this data is overlaid on the results (in red). The dotted line is the actual response of the optoC35 response, with a 7th order polynomial fit in the solid line. The blue line is the response of the C35 process as measured using SKED1.
